Two days without a solution to the problem( (Patreon)

I decided to kill a huge amount of time for tests. I made a lot of versions of the same lora with different settings in order to understand how to remove artifacts at high resolution and the result drove me into a stupor - there is practically no dependence on the weight of the lore and settings, each model can artifact at a completely different weight, and whatever I do, this is inevitable(( But at least I have identified for myself adequate types of settings for different situations, although I could not solve the problem.

512x768, Hires fix 2, Latent (nearest-exact), Denoising strength 0.5 were used everywhere

I will attach all versions of this model, maybe someone will come in handy. Push

mazav1 - my standard settings, which I used quite often, although not always, there is clearly a slight "roasting" closer to weight 1, but overall quite stable

mazav1A - the most unlike the original set of images at low values, but the most stable at high weight

mazav1B - an experimental model, which, on the whole, partially justified itself, the average noise is the same as that of the fourth model, the accuracy is high and fairly stable

maza1C - just a test that turned out to be good results, high accuracy, good contrast

mazav1D is an unsuccessful model from my point of view, a lot of noise, colors are faded, I don’t know the accuracy, visually here each model in fact needs to be examined with a magnifying glass.

  I would choose 1A or 1C, but just 1 and 1B do not have their advantages and disadvantages, you choose anyway (goodbye 1D, you are the weak link)

P.S. don't ask about the fourth comparison)