Home Artists Posts Import Register

Content

This release addresses an issue where pressing one of the shoulder-buttons would wake the GPD XD+ from sleep, even if the lid was closed.

This would most commonly happen while having the unit inside a pocket, or if it bumped into something inside a backpack (or the likes).

Thanks go to foxsevent for bringing this issue to my attention.

Downloads

Files

Comments

Anonymous

Works like a charm, it can still be woken by a button press when the lid is open but not when it's closed. Big thanks.

Anonymous

How can I apply this update without erasing everything?

Anonymous

I used the TWRP method, put the zip file on the SD card, enter TWRP by holding the power button and selecting reboot to recovery select install, select the zip file and install.

Anonymous

How about if I merged a 128gb SD card with the internal storage to get 1 big chunk?

Anonymous

You could do that, but here's a few things. 1.You won't be able to remove that SD card from your GPD, it will be unusable on any other devices until you format it. 2.It won't be one big chunk, you will still have two separate storage, but now most games/apps will be installed onto the SD card, not all but most. 3. If you're gonna do this make sure to get a very fast SD card, any cheap card won't do as they're slow and will lag your games/apps. It has to be at leas a A2 or better card, with read speed over 150mbs and writes over 70mb/s at least.

Anonymous

Indeed that's why I asked it isnt readable in TWRP. I've been running my GPD this way for months. It's a high end card I use never had any issues! Apart from not being able to read it before boot. So trying to figure out a way I can update it now without losing all my stuff again? Gets tiring having to keep setting it up from fresh when I just got it the way I like it lol. Last time I flashed it was from 1.0.x.x so used my laptop and obviously did loose all my settings but seeing as you said its dirty flushable now, what options should I untick or which general option in the drop down box?

blackseraph

There's many ways you can update without losing data. You could put the TWRP update on a USB stick and flash it via TWRP, or pick Download mode in SPFlash and untick all partitions except system and boot.

Anonymous

Thanks mate much appreciated. I usually use SPFlash so I'll go with that again, just couldnt remember which options to go with so glad you could clarify! Will get it flashed tonight.

Anonymous

Thanks for the update! Was annoying finding my system turned on even when I wasn't using it, was almost going to run checks to see if there's any wakelocks I wasn't aware of, haha

Anonymous

Hi, I just finished the procedure to install CleanROM 2.0.1.2, and Magisk. Also cleared data in Google Play Store. However, I found apps like Google Play Store & Settings not responding very frequently. Also, running app Rootcheck reported device not rooted. Actually repeated the procedure once more but still the same. Anything I can check/do? Thanks!

blackseraph

Did you let the system do a clean first boot before you installed Magisk? (If this is your first CleanROM install.) Also, did you check that Magisk works in the first place?

Anonymous

i tried installing through TWRP, and I am getting an error saying This package is for "gpd_en" devices; this is a "xds". I know i hsve a GPD XD Plus, so I'd appreciate help!

blackseraph

You are using an old outdated TWRP build. Please flash the updated recovery.img first. PsyOps mentions this step in his guide explicitly.

Anonymous

Thank you, I’ll look at his guide!

Anonymous

Hi, I've not been using my XD+ for a while and was still on an old Cleanrom version from a few months ago. I just updated to this latest version using SPF but I don't have root. Did I miss something / do something wrong?

blackseraph

You need to install Magisk manually after flashing the ROM, then go into the app settings and clear data for the Google Play Store app.

Anonymous

Thanks, I'll try it again tonight.

Anonymous

A question, is it possible to update xd+ to a never version of Android? If not 8 or 9 than at least the same generation like 7. 1.2? Also does xd+ android 7.0 run in 64bit mode or 32? Just curious about the technical aspects.

blackseraph

Yes and yes. One step at a time though. I still have a good 10 or so points on my list I want to address before that. (Like the regulatory domain limitations on the WiFi chip.)

Anonymous

Hi - I've just upgraded from 1 and its all working perfectly - thanks for all the hard work on this - the console is so much better than stock.

Anonymous

2 quick questions - am i able to select the lower clock speed? the change log indicates the 2 approaches were merged. and - silly question - how do i set the wallpaper back to the one from clean1 - the dark grey with black game icons - i have the wallpaper, but when setting it via the launcher, or via settings, it always zooms in and goes landscape.

blackseraph

The lower clock speed maximum will become a toggle-able feature in one of the next revisions. Currently on the boiler plate is a customizable back button buffer timespan setting to help users with bad back buttons avoid the double-triggering behavior.

Anonymous

Hi, I just got an XD Plus (I think it's an older revision), just flashed to this particular build from stock. I'm having a problem with the audio, I guess it's a known bug, where the speakers and headphones are swapped. Is there anything I can do to remedy this? Edit: whoops, nevermind, found your fix in the settings. Great stuff!

blackseraph

You have a newer revision model (aka. rev2 or vr) and need to toggle the headphone jack polarity option to reversed to fix the difference in the irq configuration. But you already figured that out by yourself.

Anonymous

Is it possible to make sdcard write available ?

Anonymous

Is it possible to delete some apps (google photos, play music. gmail...)?

blackseraph

Of course. After flashing just delete the appropriate folders in /system/app via TWRP.

Anonymous

Hey black do they make a pouch for the win 2 too like you have in your picture with the gpd xd?

Anonymous

Black, I'm looking for a sleeve for my win 2. Where did u get that sleeve for ur xd plus in the pic?

blackseraph

It's part of a carrying case I've gotten for my GPD Win 2. The sleeve you are seeing here came with it, but won't fit the Win 2. (The case itself does though...) <a href="https://www.amazon.de/gp/product/B010LJ5Z2M" rel="nofollow noopener" target="_blank">https://www.amazon.de/gp/product/B010LJ5Z2M</a>