HYDRA 1.3C PRO - RELEASED! (Patreon)

This build has once again been improved CPU diagnostics, that is, a mechanism for finding CO. Perhaps some of you are tired of this process and I can understand you. Nevertheless, every month there are enthusiasts who point out the shortcomings, which can improve the quality of diagnosis. This month I received a number of tips from ManniX. There is the first author's preset of diagnostic settings for Zen 3, and a number of settings: CPU Fmax, SMT and load level.

Zen 4 diagnostic is a separate story since with every new BIOS comes new AMD limitations. For HYDRA to work as it should, you need to do extensive testing, dependencies and adaptations. At the moment there are 3 different AGESA, which behave differently, respectively, which I have to spend time on.

Finally, Zen 4 users can use HYBRID OC without any limitations, that is, for example Ryzen 5 7600 can get a boost of 5850MHz. There are no AVX512 limits either. I think it's very good.

I also paid attention to the optimization of the application in general and the stability of the HYBRID OC. Not forgotten is the support for the new Radeon drivers.
More information can be found in the list of changes.

About further plans I will tell you in about a week.

TO USE THE AUTOMATIC UNDERVOLTING/OVERCLOCKING FUNCTIONS, INSTALL MSI KOMBUSTOR IN THE ROOT FOLDER OF THE APPLICATION!!!

CPU PROFILE COMPATIBILITY WITH THE PREVIOUS VERSION?

- NO    

ONLINE-GUIDE (1.3A / 1.3B) :     

https://docs.google.com/presentation/d/1_j6vB61koOVwEHLrvqt7lh1RYw4XRuoTIeEDtYmnFj0/edit?usp=sharing

CHANGELOG:    

* Added support Zen 4 for Gigabyte and other motherboards.
* Reducing the load on the processor when communicating with SMU.  
* Improved stability of communication with SMU.
* Added DDR5 preset for 6200 frequency (Hynix-M chips).
* HYBRID OC is finally available for Zen 4 without limitation. So, for example, you can get a boost of 5850MHz for your Ryzen 5 7600, bypassing all restrictions from AMD.
* Reworked CPU diagnostic, new test, new settings, FIT deleted (for lack of necessity), added Fmax. Special thanks to ManniX.
* For Zen 3, added ManniX author's diagnostic preset. It is located in HYDRA CPU DIAGNOSTIC CENTER - > Settings preset.
* Fmax (AMD PBO2 tab) for Zen 4 now works. That is, you can increase the maximum boost of the processor without visiting the BIOS.
* Combability with new Radeon drivers. RMP, GPU diagnostics and RX-TUNER work properly again. 
* HYDRA ASSISTANT got some improvements for resolvings problems after a crash when using the HYBRID OC or AMD PBO2.
* HYBRID OC got some stability improvements.
* Interface locking when RMP is applied (protection against unwanted user actions). * Added information in monitoring about CPU frequency limit (Fmax).  
* The results of successfully completed CPU diagnostics are stored in the startup diagnostics settings (more convenience).  
* By default, the HYDRA protection system focuses on the temperature of the processor and PPT, other values are set to 0 - ignore.
* Added information about which BIOS should be used by Zen 4 users. The reason is simple - the latest bios are an engineering disaster.    
* Added automatic reactivation of PBO2 settings after waking up from sleep.
* Fixed problem when user settings in HYDRA CPU DIAGNOSTIC CENTER were lost.
* Fixed an issue that prevented you from using the PHOENIX, WAKE UP!.
* Prime95 has been updated, but you can still use your version.

VIRUSTOTAL:  

https://www.virustotal.com/gui/file-analysis/ZjQwNmZkNWYwODAwOTYzNmY1NmI1MTRlZTFkZTY2ZDQ6MTY3NzYwMzYzMg==

Thank you for your support!