Home
Artists
Search Recent Random
Posts
Search DMs Popular Hash Lookup Tags Random
Importer
Import FAQ
Register
Partychan Telegram ThePornDude
Home Artists Posts Import Register

CTR 2.1 RC6 ver.25 (Patreon)

Published:
2021-07-12 15:16:14
Imported:

Downloads

Content

CTR requirements:

• Stable DRAM.
• Disabled Curve Optimizer (in BIOS). PBO – no matter.
• Manual CPU LLC (Load Line Calibration). ASUS - 3, MSI - 4, ASRock - 2, GIGABYTE - High. You also have every right to use whichever mode you like.
• CPU Voltage - Auto (in BIOS). Offset is forbidden.
• Windows 10 build 2004 or newer.
• Power plan – Balanced (tip).
• Some monitoring programs can cause problems. Also programs to control RGB, such as iCUE, can also cause problems. Tip - keep your applications up to date.
• Use the most actual version of the chipset drivers.
• Do not try to run 2 programs at the same time that have the ability to overclock the processor.

_______  

How to make a diagnosis & profile creation (VIDEO)
How to activate profiles + quick performance test for PX and P1 profiles  (VIDEO)

The program is in a 7-ZIP archive.  Download the archiver
.NET Framework 4.8.  Download
_______

What's new?    

* Libraries for game mode have been updated (LibreHardwareMonitorLib.zip contains old libraries, recommended if the new libraries do not work) .
* Fixes bugs related to the inability to activate game mode.
_______

Thank you for your support!
_______

Special thanks to @Riwwelorsch, @Ann Martiné, @ACE, @arcanazen, @DayDreamer, @Gadfly, @rizlah , @&&Devin, @Bloax , @RdWing and @wanderinarcheologist  for help with development and testing RC6.

Comments

Anonymous

Ey danke, wirklich nice. Mit Hydra hab ich so meine Probleme. Aber CTR läuft top.

Anonymous

;->

Anonymous

But how stable? I finally got stable on ver 13.

Anonymous

testing or running diagnostic now. i was away for about 6/7 weeks and tested yesterday ver .24 pub and was running like a charme for me. i just dont know why i see messages „bus busy …. and so on…“. Let see how this version will run. I just needed to lower threshold down to 15% since the game i play is using 17-20% from my gpu. otherwize i had no issues with activating game mode. As soon done i will turn resizable bar on to see if i will not perf increase.

Anonymous

Just been Playing CP77 for a couple of hours and have to say this has been the smoothest version for my system yet. Nice job!

Anonymous

my system just needed about 55min before ending a test with a reboot :) ***ClockTuner for Ryzen 2.1 RC6(ver.25) by 1usmus*** PUBLIC EDITION AMD Ryzen 9 5900X 12-Core Processor ASUS ROG CROSSHAIR VIII DARK HERO BIOS ver. 3501 SMU ver. 56.50.00 TABLE ver. 3672069 DRAM speed 3800 MHz 07/12/2021 23:19:36 P1 FREQ CCX1# 4375MHz FREQ CCX2# 4425MHz VID# 1175mV Usage trigger# 81% OB CCX1# 72 OB CCX2# 62 P2 FREQ CCX1# 4525MHz FREQ CCX2# 4525MHz VID# 1275mV Usage trigger# 29% OB CCX1# 72 OB CCX2# 62 PX FREQ HIGH# 4850MHz FREQ MID# 4775MHz FREQ LOW# 4675MHz VID HIGH# 1400mV VID MID# 1375mV VID LOW# 1350mV OB HIGH# 41 OB MID# 44 OB LOW# 62 Usage trigger# 12% PX OB LIMIT# 100MHz Phoenix - hello there :) CTR completed diagnostic in alternative mode DIAGNOSTIC RESULTS AMD Ryzen 9 5900X 12-Core Processor CPU VID: 1055 CPU TEL: 1052 Energy efficient: 4.16 Your CPU is GOLDEN SAMPLE Phoenix deactivated! 23:19:38: MODE RSMU CMD 5 ARG 0

Anonymous

Hi! The LibreHardwareMonitorLib.dll on the zip is dated 2021 while the same file on the ctr folder is dated Oct. of 2020. which one is new and which one is recommend?

Anonymous

Thanks, this is working great for me. I think this is the 1st time I've been able to run an OB test (calculate OB default) on profiles page without CTR rebooting my PC. Also game mode now working in all the games I've tested so far especially the games where game mode wasn't triggering for me in v24 (notably some games I was using a frame limit cap).

Anonymous
>>63642836

I like to run diagnostics with OB testing toggled off on tuner page. Once that is finished I hit the calculate OB default button on profiles page. It's pretty common and apparently OK for CTR to reboot your computer during OB testing. Most of the time it will reopen CTR on it's own after pc reboots (give it a minute or two).

Anonymous
>>63628640

most of the time it seems can ignore the busy errors. often related to another monitoring program on your computer. It may not actually be causing problems. I usually just toggle notifications off on tuner page.

Anonymous
>>63621798

seems stable so far for me (after lowing OB my 10-20 for PX low and mid) and game mode working in more games.

Anonymous

Works great out of the Box 👍

Anonymous

https://www.3dmark.com/3dm/63822184 ga'damn... Amazing Job Yuri!

Anonymous

Is this worth a try? I already ditched this project since it only produced crashing my computer when idle all day. I'm running all-core 4.7 GHz @1.28V BIOS OC now and it works like a charm, air-cooled 82°C max. . BTW is it just a coincidence or is telling every 5900x user that they had a "GOLDEN SAMPLE" some kind of marketing trick?

Anonymous

@SpaceGhostC2C thats an impressive build you have according to the list :))) and an amazing result. GPU is water cooled i guess since no way you can speed through like that with 41degrees otherwize? 😃

Anonymous
>>63869560

that „golden sample“ is something what i‘m wondering as well. Usual are golden sample cpu-s rare pieces according to information i could find online about this subject.

Anonymous
>>63871778

My 3090 FE is at 48°C with stock coolers whilst having 28°C ambient, just adjust the fans a bit higher than stock.

Anonymous

Windows 11 Preview 10.0.22000.51 ***ClockTuner for Ryzen 2.1 RC6(ver.24) by 1usmus*** PUBLIC EDITION AMD Ryzen 7 5800X 8-Core Processor MSI MPG B550 GAMING EDGE WIFI (MS-7C91) BIOS ver. 1.60 SMU ver. 56.50.00 TABLE ver. 3672325 DRAM speed 3600 MHz 07/18/2021 03:02:36 P1 FREQ CCX1# 4675MHz VID# 1250mV Usage trigger# 81% OB CCX1# 76 P2 FREQ CCX1# 4775MHz VID# 1325mV Usage trigger# 56% OB CCX1# 76 PX FREQ HIGH# 4850MHz FREQ MID# 4775MHz FREQ LOW# 4675MHz VID HIGH# 1400mV VID MID# 1375mV VID LOW# 1350mV OB HIGH# -27 OB MID# 52 OB LOW# 66 Usage trigger# 18% PX OB LIMIT# 100MHz Running stable enough on 'game mode safe'. Games 'feel' snapper and FPS uplift in some titles.

Anonymous

When phoenix reboots the pc while on a Calculate OB run, should CTR start up automatically after logging in again? Do I have to change a setting to get it to do that? All I get now when I manually restart is CTR running with just P1 profile enabled; I expected it'd go back to the OB run. I may have installed it wrong.

Anonymous

Юрий, добрый день, подскажите может есть какое-то решение, на борту ryzen 7 5800x + b450 aorus elite , охлад aio 360mm Первичный запуск ctr прошел гладко после диагностики golden sample , я решил сразу прогнать cinebench результат впечатлил 4700 по всем ядрам, температура 70 градусов, результат ~6240 баллов, спустя час, при запуске cinebench комп перезагружается , ничего не менял не перенастраивал. Затем снова сделал диагностику параметры ctr выдал теже, ребуты продолжаются, так же перезагрузился в cs go.. Как определяется напряжение/частота? P1 profile выставлен 4500/1.3в под нагрузкой cb профиль активируется , cpu tel(v) 1,25v, cpu vid (v) 1,3v , частота по всем ядрам 4700, откуда эти 200мгц берутся?)

Anonymous
>>64125876

У меня такая же история с последней версией: диагностика нормально проходит, а в играх перезагрузки и нестабильность. Откатился на RC5.

Anonymous

А я решил немного иначе, снизил ob значения. Думаю что перезагрузки/вылеты из-за нехватки напряжения. Сейчас в cb r20 4700 держит при температуре 75 градусов выбивает 6280 (+/- 10) очков стабильно. При этом вольтаж 1,249в. Ранее фикс 4700мгц cb r20 проходил только 1,375в и температура 84 градуса соответсвенно. Но до сих пор не понял почему бустит 4,7ггц если в p1 профиле стоит 4,5ггц, если p2,px деактивировать то становится 4,5ггц

Anonymous

Hey there, just to inform that while doing an LZX compression with 24 threads with my 5900X the system crashed and rebooted... Just used diagnostics and activated the profiles, any suggestions?

elpuertorro
>>64239713

https://www.patreon.com/file?h=52387492&i=8225029 <-- dl the pdf it's a few post below this one it shows what to do for further tuning

elpuertorro

Observation: I just noticed the update to v25 I had v24 cleared config 2 times as i do and reboot was about to delete it but notice it was asking for admin rights?...went in the folder deleted all but windows will not delete! "LibreHardwareMonitorLib.sys" So figured i will post this just in case could be the problem of others that maybe when updating it's leaving that old file behind and perhaps it's not updating/replacing it with the newer one as windows has it locked under admin? Will see what happens will report back if i find something. only reason i mentioned because i notice the *NOTE about those libraries. Update: tried different things and the easiest way to delete the file whit out having to mess with admin permissions is to reboot and as soon as you log in go delete the folder seems to be on a timer and after some time win calls for it and locks it. -me asking myself could it be something to do with the built in launch after crash or something that doesn't get cleared with the clear config button and windows calls on it after a few mins of log in?- well deleted going to test but also going to repeat 1st scenario and try and see what happens with v25 but using the v24 library.

Anonymous

I get a blue screen during testing which results in a manual overclocking statement from CTR, finishes with a Phoenix out and no results.

Anonymous

Same issue here with the current Version.

Anonymous

Hello, i need some help, is this a problem? MODE RSMU CMD 5 ARG 0 ***ClockTuner for Ryzen 2.1 RC6(ver.13) by 1usmus*** PUBLIC EDITION AMD Ryzen 5 3600 6-Core Processor MSI MPG B550 GAMING PLUS (MS-7C56) BIOS ver. 1.70 SMU ver. 46.71.00 TABLE ver. 2361603 DRAM speed 3000 MHz 07/31/2021 02:09:07 P1 FREQ CCX1# 4400MHz FREQ CCX2# 4400MHz VID# 1250mV Usage trigger# 81% OB CCX1# 1 OB CCX2# 1 P2 FREQ CCX1# 4525MHz FREQ CCX2# 4525MHz VID# 1350mV Usage trigger# 29% OB CCX1# 1 OB CCX2# 1 PX FREQ HIGH# 4600MHz FREQ MID# 4575MHz FREQ LOW# 4550MHz VID HIGH# 1375mV VID MID# 1375mV VID LOW# 1350mV OB HIGH# 1 OB MID# 1 OB LOW# 1 Usage trigger# 24% PX OB LIMIT# 100MHz HYBRID OC enabled! P1 PROFILE successfully activated! P2 PROFILE successfully activated! PX PROFILE successfully activated! 02:09:07: MODE RSMU CMD 5 ARG 0

Anonymous

Hello, which power plan? Ryzen balanced or windows balanced? thanks

Anonymous

Dear 1usmus, using this verison of CTR or New Hydra, with latest Asus Bios with Agesa 1.2.0.3 Patch C, I constant get SMU Busy Notification, it is normal? May I have to change something?

1usmus
>>66902014

This is because AMD solved the USB problems this way (dirty fix). I can suggest you to turn off the notifications.

Anonymous

Hi there, little problem with an infinite reboot loop here - perhaps anyone can help me. Followed all requirements (BIOS settings) and the first tests worked fine. At the dynamic profile creation on step 5, CTR keeps rebooting (I stopped after the 10th loop) and won't skip the "bad" settings - any idea? THX in advance :) Last 10 Logs, all with the same content: AVX light mode Cycle time: 60000 ms Reference frequency: 4375MHz Reference voltage: 1187 mV Voltage step: 6 mV Manual overclocking mode enabled 04:32:31: Saving temporary settings... NULLNULLNULLNULL....

Anonymous

Is CTR going to get some love soon? Just wondering for us people stuck with Zen 2 CPU's rn.

Anonymous

Hi, is there any way to hide the window after autorun with windows? It appears in alt+tab, and you need to open the window, then minimize it again.

Anonymous

Hey guys, I just bought a 5600G and disappointed to discover that no version of CTR supports it. Is it possible that sometime in the future it will be supported? I really like CTR, lots of options to customize. I tried Hydra, but it has basically no benefit at all for 5600G performance, so it has no use for me.

Anonymous

I run CTR diagnostic with my AMD 3600x and results as follow: DIAGNOSTIC RESULTS AMD Ryzen 5 3600X 6-Core Processor CPU VID: 745 CPU TEL: 1139 Max temperature: 57.2° Energy efficient: 3.56 Your CPU is SILVER SAMPLE Recomended values for overclocking (P1 profile): Reference voltage: 1250 mV Reference frequency: 4950 MHz Recomended values for overclocking (P2 profile): Reference voltage: 1350 mV Reference frequency: 5100 MHz Recomended values for undervolting: Reference voltage: 1175 mV Reference frequency: 4800 MHz Phoenix deactivated! I think CTR 2.1 Rc6 Ver 25 diagnostics wrong value

Anonymous

Hello guys,do you know when ryzen 5800h mobile processor will be supported?

Anonymous

hello I just joined I have a question the CTR 2.1 RC6 ver.25 (PUB) does not work does not open on my pc Can somebody help me

Anonymous

can someone help me with this? I am new to this CTR and right now I am running that diagnostic stress test but I am not sure what to do next. I've watch the videos but my screen does not look like what his screen does in the video.