CTR 2.1 RC5 (ver.17) - ready for download! (Patreon)

It was one of the most difficult months for me. The development of the auto-boost analog proved that a unique technology is extremely difficult to recreate quickly. Next month is the calibration of the dynamic profiles. Also next month you will see dynamic voltage(!) for the P1 profile (you will be able to adjust in which VID range the P1 will work) and increased frequencies(!) for the non-AVX load. At this point, a mechanism is already being developed to effectively detect the type of load. This means that the light load has more frequency margin than AVX. More flexibility, more stability.

Perhaps you have seen the announcement of the free CTR 2.1 to the public  (in my Twitter) which will take place next week. The key difference from early access remains the dynamic profiles, they remain exclusive for early access.

As for CTR PRO. This is a professional version CTR which will have up to 9 profiles for Zen 3 AM4 and up to 17 profiles for Zen 3 sTRX (all profiles are automatically created). First of all this will allow maximum performance for any load. Also OB (aka CO) for each profile and of course dynamic mode is provided. It is too early to say when this OC-moster will be released, but tentatively it will be the end of June.  At the end of May, I plan to show what it will look like.

Thank you for your patience and support. Low bow, 1usmus.

_______

Cinebench R20 included. Before you use the new smart diagnostic, make sure you have curve disabled in the BIOS and DRAM OC must be stable. CPU LLC has an incredible impact on stability. At the end of the guide there is some more information about CTR 2.1 RC5.

_______

The program is in a 7-ZIP archive.  Download the archiver
.NET Framework to 4.8. Download
_______            

What's new?

• Fixed Phoenix (there will be no more reports about the platinum sample).
• Improved performance of PX subprofiles.
• The throttle system now has a timeout of only 105ms. Allows the processor to return to normal operation faster after catch peak PPT/TEMP/TDC/EDC.
• Smoothing the cpu usage peaks to reduce the number of profile switching. 
• For dynamic profiles, the tolerances of frequency changes have been changed. Now the frequency is more stable and should not "rock the boat".
• Independent OB CALCULATION button (PROFILES tab).
• PCI mutex hold time increased to 60ms (to avoid premature unlocking).
• Small changes in OB templates and creating profiles during diagnostics.
• Improved accuracy of OB testing (now four tests instead of one). 
• Fixed exception (rare bug) when closing the application. 
• Dynamic PX MID profile now works.
• Doubled PX holding time. 
• Improved stability for a profile with suboptimal load (non CPPC). 
• Automatically save the state of the switches (CTR HYBRID OC / Autoload profile(s)). 
• Fixed incorrect VID TEL recording in TEMP.ini and TEMP_BACKUP.ini.
• Improved CTR HYBRID OC support for CPU with SMT disabled.
• Other minor bug fixes.

_______

Special thanks to @Riwwelorsch, @Ann Martiné, @ACE, @arcanazen, @DayDreamer, @Gadfly, @rizlah , @&&Devin, @Bloax , @wanderinarcheologist  and  @Stattik for help with development and testing RC5.