CTR 1.0 beta 3 (Patreon)

https://drive.google.com/file/d/1bfUiuaZ6gsgJIbe-hqWnANzOqDP0O3Vl/view?usp=sharing

Changelog:

* The problem with abnormal results in the "DIAGNOSTIC" mode has been completely solved.
* New hints in the log. 
* The tolerances for Vdroop have been revised, LLC status alerts will only be issued if there is only a serious problem with the processor power supply. In most cases LLC Auto will now be enough.
* Ryzen 5 3500,  Ryzen 5 3500X and  Ryzen 9 3900 now fully supported.
* Additional protection against non-indigenous input of values.
* CTR no blocks the interface, if the operating system contains incorrect CPPC tags or the tags cannot be read. 
* Additional calibrations in error detection algorithms. 
* The default temperature threshold has been increased (80->85). CTR will stop all processes if the temperature of 85 degrees is reached.
* No results in "BENCHMARK" tab. Fixed.

Known issues

* BSOD during the diagnosis. Try to increase LLC or do not try to use CTR anymore. Weak VRM or microcode error (BIOS) may be the main reason for CTR incompatibility.
* Ryzen 3 3100. During overclocking or undervolting, one of the threads will report a fall with the value "usage 0%". I strongly recommend not to conduct any experiments.
* Some MSI motherboards do not display SVI2 voltage correctly. Does not affect the results or CTR stability.
* CTR requires Ryzen Master to be reinstalled. There are cases when second reinstallation of Ryzen Master not eliminate problems. You should wait for a new BIOS / Ryzen Master / Chipset driver. The source of the problem is not found.
* CPPC tags "100 100 100 100 etc".  You should wait for a new BIOS / Ryzen Master / Chipset driver. The source of the problem is not found.

Note

* For correct tuning of Ryzen processors it is sometimes necessary to disable SVM (virtualization). This condition does not have to be fulfilled. Compatibility is present.