Home Artists Posts Import Register

Downloads

Content

Today there were 83 missile strikes on Ukraine, and most areas have no electricity. I decided not to wait for a miracle, started the gasoline generator and publish what I have already managed to do.

HYDRA 1.2F PRO - is a massive patch for HYDRA 1.2E PRO.

First of all, this update is intended for those who stubbornly do not want to read the manual or do not understand that the lower voltages mean the less heat and frequency. The basic HYDRA settings are no longer aimed at undervolting, but at overclocking. That is, power consumption/temperature will not change, but the operating frequency for all profiles will increase.

Secondly, the RX-TUNER will now work with any processor.

Third, I have carefully reviewed your comments and am issuing a number of corrections.

--------------------------------------------------------------

TO USE THE AUTOMATIC UNDERVOLTING/OVERCLOCKING FUNCTIONS, INSTALL MSI KOMBUSTOR IN THE ROOT FOLDER OF THE APPLICATION!!!


CPU/GPU PROFILE COMPATIBILITY WITH THE PREVIOUS VERSION(1.2E)?    

- YES.

ONLINE-GUIDE (update ETA) :     
https://docs.google.com/presentation/d/1_j6vB61koOVwEHLrvqt7lh1RYw4XRuoTIeEDtYmnFj0/edit?usp=sharing

--------------------------------------------------------------

* Added support RX-TUNER for Zen 1, Zen 1+, Zen 2 and Intel processors.
* Changed settings for CPU diagnostic from undervolting to overclocking.
* Added new features for RX-TUNER: Idle and Throttler/Response features.
* Fixed low frequency in GAME profile.
* Fixed low response app during GPU diagnostic.
* Improved stability of GPU diagnostics.
* Improved application stability when user applies new PowerPlay settings.
* GAME profile now works correctly with custom THM value if boost mode from AMD is chosen.
* A redesign of the GUI and new functions for the HYDRA CPU DIAGNOSTIC CENTER and HYDRA GPU DIAGNOSTIC CENTER. Simpler is better.
* Some bug fixes for PROFILE CREATION function if 1 CCD processor is used.

--------------------------------------------------------------

VIRUSTOTAL:  
https://www.virustotal.com/gui/file-analysis/ZDI0YTQyYzk1NWZhZjRjY2Y0OTQ1ZjU5NTM5ZTdlNmM6MTY2NTQwODk1OQ==

WHAT'S NEXT? (in late October)  

- Support Zen 4 (the quality of the microcode is a disaster, it seriously complicates the work) .
- RADEON MONSTER PROFILE (RMP). I will start with profiles for RX 6800XT.
- Improvement of RX-TUNER, the automatic OC/UV for video cards.
- Improvements for HYBRID OC.
- I will try to add a new calculator to HYDRA for DDR5.

Thank you for your support!

Comments

Anonymous

HI, Why nothing happens after I select gpu in DIAGNOSTIC. My CPU is 5600g, GPU is AMD Radeon(TM) Graphics

Anonymous

When gaming and using the PBO2 and Hybrid OC, (together or individually,) HWinfo is recording max temps of 105 C with my 5600X so am a little worried to continue using it.

Anonymous

there seems to be some kind of issue with the fan curve settings, no matter what i change it seems to ignore what ever i have it set to and defaults to just 30% all the time, 5800x 6800xt 64GB Ram 3800 MSI Gaming AC B450 1200W PSU

Anonymous

Yuri, Hope all is well, your fam and self keep safe!

Anonymous

Hi I have issue with saving and loading profiles no matter what i do loading profiles dont work either in HOC profiles or PBO2 profiles. INIs get created have "correct" data but when you try to load them you get unable to load data error

Anonymous

when you perform a diagnostic, with turn off PC activated, then cancel diagnostic, it still shutsdown the PC

Anonymous

hi, I am having problems with hybric oc, every time I run cinebech I get this error message, https://imgur.com/Myp7NPQ , the diagnostic of pbo2 and hybric oc gimme this freq and volt https://imgur.com/Itij1HA , I think it might be a voltage problem, because it doesn't seem very normal that my r5 5600 non x, gets 4650 mhz at 1,10v and all pbo2 and hybric tests the processor is around 1.25v in automatic mode

Anonymous

I'm also having same issue. Regardless the option I pick during "GPU-Tuning". PC always shuts down after tunning process completes.

Anonymous

"Secondly, the RX-TUNER will now work with any processor." It doesn't with my r5 3600. Do I need an AMD gpu and cpu for this to work? I have a 3070. Sorry, new here and new to Patreon xD

Anonymous

I'd been using CTR for a long time, but it stopped working after a BIOS reset from upgrading a GPU, so I joined Yuri's Patreon so I could try Hydra. I have a 5900X and left the diagnostics running overnight, since it wasn't done after 4 hours. Checked my PC the next day and there was a notification window stating that "Additional action is possible", and asking if I'd like to clear the log so Hydra Assistant would not be called again. The log itself only had a bit of info stating that Core 3 could not run at that clock. I clicked "yes" and nothing happened. Did the diagnostics fail? I'm not sure how to proceed now. Any help is appreciated.

Anonymous

you're bugging out on CB. part of this program is running into bugs and then backing off the settings (usually PPT, if temp is the issue, or ops/sec, if you haven't found the right GHz

Anonymous

did you not see the choices to tell HOC when/why it failed? (MT, LT, idle, gaming, etc.)

Anonymous

Thank you. That's a shame though, was hoping it meant what I thought haha. Back to stock it is