Home
Artists
Search Recent Random
Posts
Search DMs Popular Hash Lookup Tags Random
Importer
Import FAQ
Register
Partychan Telegram ThePornDude
Home Artists Posts Import Register

HYDRA 1.0 PRO - HOW TO IMPROVE MY BOOST (Patreon)

Published:
2021-12-04 13:37:58
Imported:

Content

In this video you will find information about key frequency controls and important hints.

Also about all the massive changes that will occur with the project in the next few months, I will tell you in just a couple of days ;)

Files

HYDRA 1.0 PRO - HOW TO IMPROVE MY BOOST

In this video you will find information about key frequency controls and important hints.

Comments

Anonymous

Hello Yuri. What for Settings i must have in UEFI for Hydra? I reset my Bios and all is AUTO... i have a Dark Hero with 5950X AMD CPU. Have you a PDF for the Settings in UEFI? Greets

Anonymous

There is a PDF included in every release. See page 7 for UEFI settings.

Anonymous

Oh thanks! Page 7 is my information that i have seek :) Greets and thanks!

Alexander Wünsche

Thank you for that video! I can never get rid of those red rectangles... I kept raising and raising the values (for at least 5x) one by one and the system never crashed under heavy FMA3 load with my 5900X. Temperatures stayed around 80° C for CCD1 with air cooling. Great results here, I guess.

Ravi Dissanayake

This does not work for gaming. I’m getting hit with WHEA errors at max 1375mv trying to sustain 4.8ghz.

Anonymous

I've disabled my game profile but it seems to still being active when playing games

Anonymous

My CPU was 5900x&X570s Master&850w gold power, but my computer was also BSOD&restart every 4 hours ~6hours, hydra ver.1.0E PRO setting was AUTO&Normal model (after diagnostic) CPU temperature 5x~8x volt:1.308v 4.75ghz per core Now, I re-setup the chipest driver again, I don't know the issue fix or not..

Anonymous
>>73136996

I found the trick to actually disable game mode is to set an impossible percentage for gpu or memory usage like 101% in settings. I'm doing some mining with gpu+cpu and this is the only solution I found.

Anonymous

My 5950x almost finished testing but when it tried to create the profiles (or test them, I can't figure this out) it stopped. It finished the -= PROFILE: 5T-8T =- and then sat there for 10 minutes doing nothing. When I restarted the pc, Hydra had lost all it's previous settings. Do I have to redo the full diagnostic again? Is there a way to continue from what it had found till the unknow stall?

Alexander Wünsche
>>73206296

I had this issue too at 7-12T testing on my 5900x. All I could do was to start a new diagnostic. But this time it ran through until the end ;)

Anonymous
>>73206296

The CO values should be saved after their part is done, for Core CO and CCD CO. You can then disable them in the diagnostic screen in the settings. After that rerun the diag with voltage search enabled if you want it and profile creation.